- Refactor: Mv fn `utils::asyncify` into mod `utils`
- Improve err msg for task failure in `utils::asyncify`
- Make sure `asyncify` always returns the same annoymous type
that implements `Future` if the `T` is same.
- Rewrite `extract_bin` to avoid `block_in_place`
support cancellation by dropping
- Rm unused dep scopeguard from binstalk-downloader
- Rewrite `extract_tar_based_stream` so that it is cancellable by dropping
- Unbox `extract_future` in `async_extracter::extract_zip`
- Refactor `Download` API: Remove `CancellationFuture` as param
since all futures returned by `Download::and_*` does not call
`block_in_place`, so they can be cancelled by drop instead of using this
cumbersome hack.
- Fix exports from mod `async_tar_visitor`
- Make `signal::{ignore_signals, wait_on_cancellation_signal}` private
- Rm the global variable `CANCELLED` in `wait_on_cancellation_signal`
and rm fn `wait_on_cancellation_signal_inner`
- Optimize `wait_on_cancellation_signal`: Avoid `tokio::select!` on `not(unix)`
- Rm unnecessary `tokio::select!` in `wait_on_cancellation_signal` on unix
Since `unix::wait_on_cancellation_signal_unix` already waits for ctrl + c signal.
- Optimize `extract_bin`: Send `Bytes` to blocking thread for zero-copy
- Optimize `extract_with_blocking_decoder`: Avoid dup monomorphization
- Box fut of `fetch_crate_cratesio` in `PackageInfo::resolve`
- Optimize `extract_zip_entry`: Spawn only one blocking task per fn call
by using a mspc queue for the data to be written to the `outfile`.
This would improve efficiency as using `tokio::fs::File` is expensive:
It spawns a new blocking task, which needs one heap allocation and then
pushed to a mpmc queue, and then wait for it to be done on every loop.
This also fix a race condition where the unix permission is set before
the whole file is written, which might be used by attackers.
- Optimize `extract_zip`: Use one `BytesMut` for entire extraction process
To avoid frequent allocation and deallocation.
- Optimize `extract_zip_entry`: Inc prob of reusing alloc in `BytesMut`
Performs the reserve before sending the buf over mpsc queue to
increase the possibility of reusing the previous allocation.
NOTE: `BytesMut` only reuses the previous allocation if it is the
only one holds the reference to it, which is either on the first
allocation or all the `Bytes` in the mpsc queue has been consumed,
written to the file and dropped.
Since reading from entry would have to wait for external file I/O,
this would give the blocking thread some time to flush `Bytes`
out.
- Disable unused feature fs of dep tokio
Signed-off-by: Jiahao XU <Jiahao_XU@outlook.com>
* Add new dep async_zip v0.0.9 to binstalk-downloader
with features "gzip", "zstd", "xz", "bzip2", "tokio".
* Refactor: Simplify `async_extracter::extract_*` API
* Refactor: Create newtype wrapper of `ZipError`
so that the zip can be upgraded without affecting API of this crate.
* Enable feature fs of dep tokio in binstalk-downloader
* Rewrite `extract_zip` to use `async_zip::read::stream::ZipFileReader`
which avoids writing the zip file to a temporary file and then read it
back into memory.
* Refactor: Impl new fn `await_on_option` and use it
* Optimize `tokio::select!`: Make them biased and check for cancellation first
to make cancellation takes effect ASAP.
* Rm unused dep zip from binstalk-downloader
Signed-off-by: Jiahao XU <Jiahao_XU@outlook.com>
* Add new dep tokio-tar v0.3.0 to binstalk-downloader
* Add new dep tokio-util v0.7.4 with feat io to binstalk-downloader
* Add dep async-trait v0.1.59 to binstalk-downloader
* Add new dep async-compression v0.3.15 to binstalk-downloader
with features "gzip", "zstd", "xz", "bzip2", "tokio".
* Rewrite `Download::and_visit_tar` to use `tokio-tar`
to avoid the cumbersome `block_in_place`.
* Apply temporary workaround: Rm use of let-else in mod visitor
Signed-off-by: Jiahao XU <Jiahao_XU@outlook.com>
as there is no need to randomize the first one to be polled.
For `cancel_on_user_sig_term` and `StreamReadable::fill_buf`, the
cancellation future should always to be polled first so that user would
feel responsive.
Signed-off-by: Jiahao XU <Jiahao_XU@outlook.com>
- bin and binstalk uses new let-else lang feature
- dep zstd of binstalk-downloader just bumped its msrv to v1.64.0
Signed-off-by: Jiahao XU <Jiahao_XU@outlook.com>
* Avoid potential panicking in `args::parse` by using `Vec::get` instead of indexing
* Refactor: Simplify `opts::{resolve, install}` API
Many parameters can be shared and put into `opts::Options` intead and
that would also avoid a few `Arc<Path>`.
* Optimize `get_install_path`: Avoid cloning `install_path`
* Optimize `LazyJobserverClient`: Un`Arc` & remove `Clone` impl
to avoid additional boxing
* Optimize `find_version`: Avoid cloning `semver::Version`
* Optimize `GhCrateMeta::launch_baseline_find_tasks`
return `impl Iterator<Item = impl Future<Output = ...>>`
instead of `impl Iterator<Item = AutoAbortJoinHandle<...>>`
to avoid unnecessary spawning.
Each task spawned has to be boxed and then polled by tokio runtime.
They might also be moved.
While they increase parallelism, spawning these futures does not justify
the costs because:
- Each `Future` only calls `remote_exists`
- Each `remote_exists` call send requests to the same domain, which is
likely to share the same http2 connection.
Since the conn is shared anyway, spawning does not speedup anything
but merely add communication overhead.
- Plus the tokio runtime spawning cost
* Optimize `install_crates`: Destruct `Args` before any `.await` point
to reduce size of the future
* Refactor `logging`: Replace param `arg` with `log_level` & `json_output`
to avoid dep on `Args`
* Add dep strum & strum_macros to crates/bin
* Derive `strum_macros::EnumCount` for `Strategy`
* Optimize strategies parsing in `install_crates`
* Fix panic in `install_crates` when `Compile` is not the last strategy specified
* Optimize: Take `Vec<Self>` instead of slice in `CrateName::dedup`
* Refactor: Extract new fn `compute_resolvers`
* Refactor: Extract new fn `compute_paths_and_load_manifests`
* Refactor: Extract new fn `filter_out_installed_crates`
* Reorder `install_crates`: Only run target detection if args are valid
and there are some crates to be installed.
* Optimize `filter_out_installed_crates`: Avoid allocation
by returning an `Iterator`
* Fix user_agent of `remote::Client`: Let user specify it
* Refactor: Replace `UIThread` with `ui::confirm`
which is much simpler.
Signed-off-by: Jiahao XU <Jiahao_XU@outlook.com>
* Optimize `Download::and_extract`: Avoid dup monomorphization
* Increase buffer size for binstall_crates_v1 to `4096 * 5`
* Optimize `opts::resolve`: Avoid unnecessary `clone`s
* Fix reserve in `opts::resolve`: Do not over-reserve
* Rename field `opts::Options::resolver` => `resolvers`
* Refactor: Extract new type `resolve::PackageInfo`
- which makes `opts::resolve_inner` easier to understand
- reduce number of parameters required for `download_extract_and_verify` and
`collect_bin_files`
- reducing size of future returned by `opts::resolve_inner` by dropping
`cargo_toml::{Manifest, Package}` as early as possible since
`Manifest` is 3000 Bytes large while `Package` is 600 Bytes large.
* Optimize `fetchers::Data`: Use `CompactString` for field name & version
since they are usually small enough to fit in inlined version of
`CompactString`.
* Optimize `gh_crate_meta`: Avoid unnecessary allocation
in `RepositoryHost::get_default_pkg_url_template`.
* Refacator: Use `Itertools::cartesian_product` in `apply_filenames_to_paths`
* Optimize `ops::resolve`: Avoid unnecessary `clone` & reduce future size
by calling `fetcher.target_meta()` to obtain final metadata after
downloaded and extracted the binaries.
* Optimize `ops::resolve`: Avoid unnecessary allocation
in `download_extract_and_verify`: Replace `Itertools::join` with
`Itertools::format` to avoid allocating the string.
* Fix disabling cargo-install fallback
* Simplify `BinFile::from_product`: Takes `&str` instead of `&Product`
since we only need `product.name`
* Rename `BinFile::from_product` => `BinFile::new`
* Refactor: Create newtype `ops::resolve::Bin`
so that we don't need to `unwrap()` on `Product::name`
and reduce memory usage.
Signed-off-by: Jiahao XU <Jiahao_XU@outlook.com>
* Refactor: Extract new crate binstalk-types
* Optimize: Rm field `CrateInfo::other`
which also removes dep serde-tuple-vec-map and serde-json from
binstalk-types.
This also makes `CrateInfo` easier to use, more generic and can be used
over any `Serializer`, not just `serde_json::Value`.
* Mark all errors in `binstalk-manifests` as non_exhaustive
* Reduce size of `CvsParseError` by using `Box<str>`
instead of `String` for variant `UnknownSourceType`.
* Reduce size of `CratesTomlParseError` to 16 bytes on 64bit platform
by boxing variants `TomlWrite` and `CvsParse` as these two fields are
significantly larger than other variants.
* Unify import style in mod `binstall_crates_v1`
* Replace dep binstalk-manifests with binstalk-types in binstalk-downloader
to reduce its transitive dependencies and enables binstalk-downloader to
be built in parallel to binstak-manifests.
* Replace dep binstalk-manifests with binstalk-types in binstalk
to reduce transitive dependencies and enables binstalk to be built in
parallel to binstalk-manifests.
This is benefitial because binstalk-manifests pulls in toml_edit, which
could takes up to 15s to be built on M1 (7-9s for codegen).
* Add dep binstalk-manifests to crates/bin
* Update dependabot and GHA release-pr
Signed-off-by: Jiahao XU <Jiahao_XU@outlook.com>
* Box `HttpError` in `binsalk_downloader::remote::Error::Http`
as `HttpError` contains `Url` which are too big.
* Box `HttpError` in `BinstallError::Http` same as the previous commit.
* Box `TinyTemplateError` in `BinstallError::Template`
since `TinyTemplateError` is 56 bytes large where most of the other variants are below 40 bytes large.
* Rm unsed variant `BinstallError::VersionUnavailable`
* Box `CratesIoApiError` in `BinstallError::CratesIoApi`
It is 32 bytes large while other variants are below 40 bytes large.
* Improve err msg for `BinstallError::CrateContext`
* Rm unused variant `BinstallError::VersionReq`
Signed-off-by: Jiahao XU <Jiahao_XU@outlook.com>
Resolved#522
* Add dep tracing v0.1.37 to binstalk
* Use `tracing` instead of `log` for logging in binstalk
* Rm dev dep `env_logger` since `log` is no longer used
* Rm unused dep `log` from binstalk
* Replace use of `log` with `tracing` in crates/bin
* Enable feat std of dep log in crates/bin
* Add dep tracing v0.1.37 to binstalk-downloader
* Replace use of `log` with `tracing` in binstalk-downloader
* Rm unused dep `log` from binstalk-downlaoder
* Wrap `ops::{install, resolve}` in `tracing::instrument`
* Wrap `Download::and_{extract, visit_tar}` in `instrument`
Signed-off-by: Jiahao XU <Jiahao_XU@outlook.com>
